Tips for slip-proofing your premises

Qube Magazine

Slip, trips and falls are the most common accident reported in the workplace. The law states that:

Employers must ensure the health and safety of all employees and anyone who may be affected by their work under The Health and Safety at Work Act 1974. This includes taking steps to control slip and trip risks at work.

The Management of Health and Safety at Work Regulations 1999 requires employers to assess risks (including slip and trip risks), and take action to address them where necessary.

Finally, the Workplace (Health, Safety and Welfare) Regulations 1992 require floors to be suitable, in good condition and free from obstructions. People should be able to move around safely.

FibreGrid, the leading producer of anti-slip flooring products, offers a fully comprehensive solution to all potential slip hazards. Here are some of our top tips for slip-proofing your work premises.

  1. Identify the area of your premises with the heaviest foot traffic. Do you have one main entrance area used by employees and visitors alike? Do you have a walkway where most of your foot traffic occurs? The more foot traffic, the higher chance of a slip or fall, so make sure you pay extra attention to these areas when choosing your anti slip solution. FibreGrid offer branded anti slip floor mats for your premises, so not only will your premises entrance offer an extremely durable anti slip flooring solution, but will also look aesthetically pleasing for your premises. We also offer anti slip GRP line marking panels for those areas in your warehouse that see the most foot traffic.
  2. We all know how easy it is to trip up the stairs (or down them), so areas requiring extra attention when slip proofing your property are any staircases or steps across your premises. FibreGrid offer a huge range of anti slip stair solutions including stair tread covers, nosings, anti-slip paints and tapes – all suitable for any budget. Make sure you choose the right solution for the level of traffic your stairs sees. For rarely used fire escapes, FibreGrid’s SlipGrip Standard Stair Tread Covers are ideal, however if you have entrance stairs that see large amounts of employee or visitor foot traffic, our aluminium reinforced stair tread covers may suit you better.
  3. Our next tip is to hazard spot your premises. Walk around your premises and look around for any hazard that may pose a potential trip threat. Are there any holes, potholes or uneven paths on your premises? FibreGrid offer concrete repair products which allow you to quickly and easily patch these issues up. Are there any areas prone to getting wet (which may then ice or moss up in the winter months?) Is any of your machinery leaking fluid which may cause a fatal slip? Is any of your current anti slip solution too worn to be doing its job property? A full checklist can be found here for things to look out for –
  4. Our final tip is to identify areas with limited natural light. If you have a particularly dark section, or if you have areas used by pedestrian during night time hours, then you open yourself up to a higher potential for slips and falls due to limited visibility. Other than ensuring these areas are well lit, you may also want to provide glow in the dark flooring for your foot traffic. FibreGrid offer our Safety Glow range – anti slip GRP flooring which glows in the dark – showing pedestrian exactly where to put their feet to avoid any accidents.

Tips for slip-proofing your premises